HULCAN® Damascus Bread Knife, 8.3"

Layers of steel folded and forged together — 67 of them on this knife — around a harder core that does the cutting. The layers give the blade its pattern and a tougher body around the edge. The core is what you actually cut with.

Real. It's the 67 forged layers, brought out by etching after the blade is ground. It won't wash or wear off. It's also not what makes the knife cut — the core does that. The pattern is proof of how it was made.

Hardened to 60+ HRC. A stainless, high-carbon steel with cobalt and molybdenum, chosen because it holds a fine edge for a long time and still comes back on a normal whetstone.

HRC is the Rockwell hardness scale. Harder steel holds an edge longer but gets brittle and chips; softer steel is tough but goes dull fast. 60+ is where the edge lasts through weeks of daily cooking and you can still sharpen it at home. Harder knives exist. Most people end up with a chipped one.

Ground to 15° per side and finished by hand. That's noticeably thinner than a typical Western knife at 20°, which is why it goes through tomatoes and onions instead of pushing them apart.

Depends how much you cook. For most home kitchens: a honing rod every week or two keeps the edge straight, and a whetstone every few months restores it. A dull edge isn't a defect — an edge is a working part.

No. Heat, detergent and rattling against other metal dull and chip the edge, and they're hard on the handle. By hand it takes ten seconds: warm water, soap, dry it straight away. Dishwasher damage isn't covered by the warranty.

The core is stainless, but stainless means it stains less, not never. Don't leave it wet in the sink or soaking overnight. Wash it, dry it, put it away.

Wood or plastic. Never glass, marble, stone or a ceramic plate — they roll a fine edge in a single cut. If the board clicks when the knife lands, it's the wrong board.

Bones, frozen food, and anything you'd have to twist or pry through. A thin, hard edge is built to slice, not to lever. For bones use a cleaver. For frozen, wait.

Micarta — layers of fabric set in resin and pressed hard. It doesn't soak up water, doesn't crack like wood, and stays grippy when your hands are wet.

The steel runs the full length of the handle in one piece. The knife balances near the bolster instead of feeling blade-heavy, and there's nothing to work loose over the years.

Yes. It's ground evenly on both sides, so it cuts the same in either hand.

We sell direct, we don't pay a celebrity, and there's no brand premium stacked on top. The money goes into the steel, the forging and the edge. Most of what you pay for elsewhere is the story.

Manufacturing and material defects, for the life of the knife. It doesn't cover normal edge wear, dullness from use, damage from glass or stone surfaces, or the dishwasher. Email hello@hulcancookware.com with your order number and photos.

If you want to put it in the dishwasher, never sharpen it, and hack through chicken bones and frozen bread with it, this isn't your knife. It asks for a wood or plastic board, a wash by hand and a hone now and then. That's the deal for an edge this thin.